User manual

102

Vin1Offset I/O21

Vin1 Filter I/O 22

I/O: Vin1 Oset

21 0.0%

I/O: Vin1 Filter

22 15ms

7 - PARAMETER DESCRIPTION

LCD Display

Range 0.0 to 100% (Default 0.0%)

Description This parameter is used to alter the starting value of the input being received at Vin1 terminals (analog).

For example, with a 0 to 10VDC input, setting this parameter to a value of 10% alters the range to

1 to 10VDC.

LCD Display

Range 1 - 1000 ms (Default 15ms)

Description This parameter sets the low-pass lter time for the analog input signal being received at Vin1 terminals

(analog). Longer lter times better reduce noise disturbances but will also slow the signal response time.

CinCong I/O23

I/O: Cin Cong

23 0 - 20mA 50

LCD Display

Range

Description Cin Cong selects the type of signal for analog input Cin. Parameters I/O 25 (Cin Offset) and I/O 24 (Cin

Span) may be used to customize the selected range.

z NOTE: When the signal range is inverted the minimum input corresponds to the maximum output,

while the maximum input corresponds to the minimum output.