User manual

101
Vin1Cong I/O19
I/O: Vin1 Cong
19 0 - 10V
7 - PARAMETER DESCRIPTION
LCD Display
Range
Description Vin1 Cong, selects the type of signal for analog input Vin1. Vin1 can be a voltage, current or pulse train
input. This parameter also determines input range, impedance, and characteristics. Parameters I/O 21 (Vin1
Offset) and I/O 20 (Vin1 Span) may be used to customized the selected range.
z NOTE: When the signal range is inverted, the minimum input produces the maximum output while the
maximum input produces the minimum output.
See also DRV 05 on page 78 & I/O 20, 21, 22
“Description of Control Terminals” on page 41
Parameter Value Function
0 - 10V (Default) 0-10Vdc signal
0 - 10V Brk W 0-10Vdc signal with broken wire detection for speed pot operation
0 - 10V I 0-10Vdc signal inverted
0 - 10v Bipol
0-10Vdc signal
5Vdc is stop with 0Vdc Full Rev and 10Vdc Full FWD
0-5V 0-5Vdc signal
0-5V I 0-5Vdc signal inverted
0-20mA 250 0 to 20 mA current signal with 250 Ohm load
0-20mA 250I 0 to 20 mA current signal with 250 Ohm load inverted
4-20mA 250 4-20mA current signal with 250 Ohm load
4-20mA 250I 4-20mA current signal with 250 Ohm load inverted
PT 0-1kHz 0 to 1 KHz pulse train
PT 0-10kHz 0 to 10 KHz pulse train
PT 0-100kHz 0 to 100 KHz pulse train
Vin1 Span I/O 20
I/O: Vin1 Span
20 100.0%
LCD Display
Range 0.0 to 200% (Default 100%)
Description This parameter is used to alter the range of the input being received at Vin1 terminals (analog). For
example, with a 0 to 10VDC input, setting this parameter to a value of 50% alters the range to 0 to 5VDC.