Technical information

3 – KEYPAD OPERATION
Remote LCD Keypad and Display
25
3.3.9 Alarm Screen
When an alarm is present, the word “Alarm” is displayed on the operate screen. Pressing the ENTER key displays more information
about the alarm.
Alarm Number
Alarm Name
3.3.10 Procedure for Setting Data
Select a parameter that is to be changed. To change Motor FLA from 10 Amps to 30 Amps:
From the main screen:
T Ready Ia= 0.0A
Stopped Va= V
Press MENU key and the display shows QST: (Quick Start) screen.
QST: Jump Code
00 1
Press UP key once to Motor FLA (QST 01).
QST: Motor FLA
01 10 Amp
Press ENTER key once, the cursor starts to flash in the one’s place.
QST: Motor FLA
01 10 Amp
Press LEFT key once, the cursor flashes in the ten’s place.
QST: Motor FLA
01 10 Amp
Press UP arrow to increase the value, for a value of 30, pressed twice.
QST: Motor FLA
01 30 Amp
Press ENTER to store the value.
QST: Motor FLA
01 30 Amp
Press UP arrow to change another parameter in QST.
Press MENU to change another parameter in another group.
Press LEFT arrow to go back to the main screen.
3.3.11 Jump Code
At the beginning of each parameter group, there is a Jump Code parameter. By changing the value of this parameter and pressing
enter, you can jump directly to any parameter within that group.