Technical information

iii
WARNING
1. This starter contains hazardous voltage that can cause electric shock
resulting in personal injury or loss of life.
2. Before servicing, be sure all AC power is removed from the starter and
the motor has stopped spinning
3. Wait at least 1 minute after turning off the AC power for the bus
capacitor to discharge on the control card.
4. Do not connect or disconnect the wires to or from the starter when
power is applied.
5. Ensure shielded cables are discharged.
WARNING
1. Service only by qualified personnel.
2. Make sure ground connection is in place.
3. Make certain proper shield installation is in place.