Technical information

3 – KEYPAD OPERATION
Remote LCD Keypad and Display
23
3.3.4 Parameter Group Screens
From the operate screen, the parameter group screens are accessed by pressing either the MENU or the LEFT arrow keys. The
parameter group screens display the different parameter groups; QST, CFN, PFN, I/O, FUN, FL_.
MMM: PPPPPPPPPPP
MI VVVVVVVVVVV
MMM: = Parameter Group
MI: = Menu Index
PPP: = Parameter Name
VVV: = Parameter Value and Units
Refer to Section 4 for a listing of the parameters and their ranges.
3.3.5 Meter Pages
Although any meter may be viewed by changing the two meter parameters, there are 11 “Meter Pages” that are easily accessed to
view all of the meter information. These meter pages are scrolled through by pressing the UP or DOWN arrows from the operate
screen.
Current I2= 0A
I1= 0 I3 0A
Voltage V2= 480V
V1= 480 V3= 480V
MWatt Hour= 1
kWatt Hour= 356
Motor PF =0.00
VARS = 0
Watts = 0
VA = 0
TruTorque = 0%
Power = 0%
Curr Imbal= 0.0%
Overload = 12%
Gnd Curr = 0%
Frequency =60.0H
Phase =AbC
Run Days =xxxx
Run Hours =xx:xx
Analog In = 0.0%
Analog Out= 0.0%
Starts =xxxxx