Technical information

10 – APPENDIX
162
Appendix E – Parameter Table
Following is the parameter table for both the LED and LCD Display. The last column is a convenient place to write down parameter
settings.
Quick Start Group
LED LCD Parameter Setting Range Units Default Page Setting
P1 QST 01 Motor FLA 1– 6400 RMS Amps 10 41
P2 QST 02 Motor Service Factor 1.00 – 1.99 1.15 41
P3 QST 03 Motor Running Overload Class Off, 1 – 40 10 42
P4 QST 04 Local Source 43
P5 QST 05 Remote Source
Keypad
Terminal
Serial
Terminal
44
P6 QST 06 Initial Current 1 50 – 600 %FLA 100 45
P7 QST 07 Maximum Current 1 100 – 800 %FLA 600 46
P8 QST 08 Ramp Time 1 0 – 300 Seconds 15 47
P9 QST 09 Up To Speed Time 1 – 900 Seconds 20 48
Control Function Group
LED LCD Parameter Setting Range Units Default Page Setting
P10 CFN 01 Start Mode Voltage Ramp
Current Ramp
TT Ramp
Power Ramp
Current
Ramp
49
P8 CFN 02 Ramp Time 1 0 – 300 Seconds 15 47
P6 CFN 03 Initial Current 1 50 – 600 %FLA 100 45
P7 CFN 04 Maximum Current 1 100 – 800 %FLA 600 46
P21 CFN 05 Ramp Time 2 0 – 300 Seconds 15 57
P19 CFN 06 Initial Current 2 50 – 600 %FLA 100 56
P20 CFN 07 Maximum Current 2 100 – 800 %FLA 600 57
P11 CFN 08 Initial Voltage/Torque/Power 1 – 100 % 25 50
P12 CFN 09 Maximum Torque/Power 10 – 325 % 105 51
P13 CFN 10 Kick Level 1 Off, 100 – 800 %FLA Off 52
P14 CFN 11 Kick Time 1 0.1 – 10.0 Seconds 1.0 52
P22 CFN 12 Kick Level 2 Off, 100 – 800 %FLA Off 57
P23 CFN 13 Kick Time 2 0.1 – 10.0 Seconds 1.0 58
P15 CFN 14 Stop Mode Coast
Volt Decel
TT Decel
Coast 53
P16 CFN 15 Decel Begin Level 100 – 1 % 40 54
P17 CFN 16 Decel End Level 50 – 1 % 20 55
P18 CFN 17 Decel Time 1 – 180 Seconds 15 56
Protection Function Group
LED LCD Parameter Setting Range Units Default Page Setting
P24 PFN 01 Over Current Level Off, 50 – 800 % FLA Off 58
P25 PFN 02 Over Current Time Off, 0.1 – 90.0 Seconds 0.1 59
P26 PFN 03 Under Current Level Off, 5 – 100 % FLA Off 60
P27 PFN 04 Under Current Time Off, 0.1 – 90.0 Seconds 0.1 60
P28 PFN 05 Current Imbalance Level Off, 5 – 40 % 15 61
P29 PFN 06 Ground Fault Level Off, 5 – 100 % FLA Off 62
P30 PFN 07 Over Voltage Level Off, 1 – 40 % Off 63
P31 PFN 08 Under Voltage Level Off, 1 – 40 % Off 63
P32 PFN 09 Voltage Trip Time 0.1 – 90.0 Seconds 0.1 64