Technical information

10 – APPENDIX
147
Appendix A – CE Mark
According to the EMC – Directive 89/336/EEC as Amended by 92/31/EEC and 93/68/EEC
Product Category: Motor Controller
Product Type: Reduced Voltage Solid State Motor Controller
Model Numbers:
Model Number Model Number Model Number Model Number
RBX-1-S-027A-11C RBX-1-S-240A-15C RCX-1-S-027A-11C RCX-1-S-240A-15C
RBX-1-S-040A-11C RBX-1-S-302A-15C RCX-1-S-040A-11C RCX-1-S-302A-15C
RBX-1-S-052A-12C RBX-1-S-361A-16C RCX-1-S-052A-12C RCX-1-S-361A-16C
RBX-1-S-065A-12C RBX-1-S-414A-17C RCX-1-S-065A-12C RCX-1-S-414A-17C
RBX-1-S-077A-13C RBX-1-S-477A-17C RCX-1-S-077A-13C RCX-1-S-477A-17C
RBX-1-S-096A-13C RBX-1-S-515A-17C RCX-1-S-096A-13C RCX-1-S-515A-17C
RBX-1-S-125A-14C RBX-1-S-590A-18C RCX-1-S-125A-14C RCX-1-S-590A-18C
RBX-1-S-156A-14C RBX-1-S-720A-19C RCX-1-S-156A-14C RCX-1-S-720A-19C
RBX-1-S-180A-14C RBX-1-S-838A-20C RCX-1-S-180A-14C RCX-1-S-838A-20C
RBX-1-S-180A-15C RCX-1-S-180A-15C
Manufacturer’s Name: Benshaw, Inc.
Manufacturer’s Address: 1659 East Sutter Road
Glenshaw, PA USA
15116
The before mentioned products comply with the following EU directives and Standards:
Safety: UL 508 Standard for Industrial Control Equipment covering devices for starting, stopping, regulating,
controlling, or protecting electric motors with ratings of 1500 volts or less.
EMC: EN 50081-2 Emissions Radiated/Conducted
EN 55011/05.98+A1:1999
EN 50082-2 Immunity/Susceptibility which includes:
EN 61000-4-2 Electrostatic Discharge
EN 61000-4-3 Radiated RF
EN 61000-4-4 Electrical Fast Transient/Burst
EN 61000-4-6 Injected Currents
The products referenced above are for the use of control of AC motors.
For application information, consult the following document from Benshaw:
The use in residential and commercial premises (Class B) requires an optional EMC series filter.
Via internal mechanisms and Quality Control, it is verified that these products conform to the
requirements of the Directive and applicable standards.
Glenshaw, PA USA - 1 October 2003
Neil Abrams Harry Hagerty, PE
Quality Control VP and General Manager
Manager Industrial Controls Division