Technical information

1 – INTRODUCTION
Interpreting Model Numbers
5
1.3 Inspection
Before storing or installing the RediStart starter with MX control, thoroughly inspect the device for possible shipping damage. Upon
receipt:
• Remove the starter from its package and inspect exterior for shipping damage. If damage is apparent, notify the shipping agent
and your sales representative.
• Open the enclosure and inspect the starter for any apparent damage or foreign objects. Ensure that all of the mounting hardware
and terminal connection hardware is properly seated, securely fastened, and undamaged.
• Ensure all connections and wires are secured.
• Read the technical data label affixed to the starter and ensure that the correct horsepower and input voltage for the application
has been purchased.
• The starter numbering system for a chassis is:
R __ __ __ __ __ __ __ A __ __ _
_
Enclosures
C = Open Chassis
A
mp Rating, (0 – 999A )
Family of RediStart Starter
B = Bypass
C = Continuous
Type of Control
M = Micro II Control
X = MX Control
Type of Bypass
0 = None (only available with RC)
1 = Integrated
2 = Separate, Definite Purpose (Only with 1000V Starter)
3 = Separate, ATL IEC AC3 Rated
4 = Separate, ATL NEMA Rated (AC4)
Fault Level
S = Standard
H = Hi
g
h
Frame Size
Example of the model Number: RBX-1S-361A-14C
A RediStart starter with bypass, MX control, Integrated Bypass, Standard Fault, 361 Amp unit, Frame 14, open Chassis