User Manual

14
Before the First Use
• Make sure the appliance is switched off and unplugged before use.
NOTE: Smoke and odors may occur during first use.
1. Wash the parts of the appliance. See "Care and Cleaning" section.
2. Place the appliance on a clean, flat and heat-resistant surface.
3. Place the frying basket (2) to the bucket (1) and slide the frying basket lock button (3) until locks.
4. Insert the basket with the bucket in the reception without food until it snaps into place.
Note: If the bucket with the basket does not fit well into the reception, the appliance will not turn on.
5. Plug in the appliance. All the lights on the control panel (4) will turn on briefly, then they turn off
and the start button indication (11) will stay on.
6. Press the start button (11). A sound will be heard and all the lights on the control panel will turn
on. On the display screen (9) “180
o
C” and “15min” will alternate.
7. Press the program selection button “M” (12). The indication will turn on.
8. Press the start button (11) and the program will start. The power indication lights (13) will turn
on.
9. On the display screen (9) the preset time (18min) and the preset temperature (200
ο
C) are
alternate.
10. When the selected program is finished, all the lights will turn off and only the start button
indication light (11) will remain on. The appliance will work for a few seconds.
11. It will beep 5 times and the appliance will stop and will be ready for use.
Using the Appliance
• Make sure the appliance is switched off and unplugged before use.
• It is recommended to preheat the appliance for 5 minutes without food before cooking.
1. Place the appliance on a clean, flat and heat-resistant surface.
2. Place the frying basket (2) with the food to the bucket (1) and slide the frying basket lock button
(3) until locks.
3. Insert the basket with the bucket in the reception without food until it snaps into place.
Note: If the bucket with the basket does not fit well into the reception, the appliance will not turn on.
4. Plug in the appliance. All the lights on the control panel (4) will turn on briefly, then they turn off
and the start button indication (11) will stay on.
5. Press the start button (11). A sound will be heard and all the lights on the control panel will turn
on. On the display screen (9) “180
o
C” and “15min” will alternate.
6. Press the program selection button “M” (12) successively until the corresponding indication on
the display screen (9) turns on (see section “Programs & preset times & temperatures”).
7. Press the temperature setting buttons (10) consequently to set the temperature of your choice.
8. Press the time setting buttons (14) consequently to set the time of your choice.
9. Press the start button (11) to start the program. On the display screen (9) the time and the
temperature of the program you have chosen alternate.
10. When the selected program is finished, all the lights will turn off and only the start button
indication light (11) will remain on. The appliance will work for a few seconds.
11. It will beep 5 times and the appliance will stop. The start button indication (11) will remain on.