Operation Manual

14 Using the monitor wall mount set (purchased separately)

Using the monitor wall mount set (purchased separately)

The back of your monitor has screw holes to fix the stand and the base. A VESA standard

mount bracket with 100mm pattern could be installed via installing a special transfer kit made

for this model. Should you need the VESA wall mount transfer kit, please contact BenQ service.

Before starting to install the monitor wall mount set, please read the precautions carefully.

Precautions

• Install your monitor and monitor mount set on a wall with flat surface.

• Ensure that the wall material and the standard wall mount set (purchased separately) are

stable enough to support the weight of the monitor. Refer to the product specifications for

weight information.

• Turn off the monitor and the power before disconnecting the cables from the LCD monitor.

1. Remove the monitor stand and base.

While the monitor is inside the box, remove the

monitor stand.

2. Install the VESA wall mount transfer kit as

illustrated.

3. Use a magnetic tip screwdriver to fix the

VESA wall mount transfer kit to the

monitor with 6 screws from step 1.