Operation Manual

11 How to assemble your monitor hardware
4. Install the back cover.
Align the back cover with the holes on the back of the
monitor, and press the sides of the back cover against
the holes to lock it into place as illustrated.
To remove the back cover, see How to change cable
connection after initial installation on page 13 for more
information.
5. Lift the monitor.
Take the monitor out of the box by 2 people. Carefully
lift the monitor, turn it over and place it upright on its
stand on a flat even surface.
Remove the foam wrap from the monitor.
Make sure to perform this procedure by 2 people. Failure to
do so may cause injuries and damages to the personnels and
the monitor itself.
Consider keeping the box and packaging in storage for use in
the future when you may need to transport the monitor.
The fitted foam packing is ideal for protecting the monitor
during transport.
6. Tilt the monitor.
You should position the monitor and angle the screen to
minimize unwanted reflections from other light sources.
2
1