Operation Manual

38 How to adjust your monitor
4. Select the custom key you want to change.
5. In the sub menu, select a function that can be accessed by this key. A pop-up message will
appear, showing that the setup is complete.
Adjusting Dynamic Accuracy (XL2735 only)
You are provided with Dynamic Accuracy feature that reduces motion blur in games or during
video playback. This feature, however, works on the refresh above 100Hz and disables flicker-
free function. If you prefer to disable the setting, contact the local customer service.
Setting up your own game mode
There are several preset picture modes on your monitor that are suitable for games. To better
suit your needs, you can change and save the related display settings, and switch to your own
game mode easily.
1. Adjust the related available settings in different OSD menus.
2. After all settings are done, go to Game Settings and Save Settings and save as one of the
game modes.
3. If you want to switch to your game mode at any time, go to Picture and Picture Mode,
and select the game mode you saved in Step 2. Your preferred display settings will be
applied all at once.
Working with game mode to go by S Switch
Once the adjusted display settings have been saved to S Switch, you can take the settings with
you to other compatible BenQ ZOWIE LCD monitors. It is driver-free and helps apply new
game modes quickly.
Saving your game modes to S Switch
By default, the settings for game mode buttons (labeled 1~3) on S Switch are identical to the
game modes (Gamer1 / Gamer2 / Gamer3) in Picture > Picture Mode on your monitor. You
can change the settings as desired.
1. Adjust to the personal preference in monitor menu.
2. Press and hold one of the game mode buttons (labeled 1~3) on S Switch to save the
customized settings. The game modes are now saved on S Switch and are ready to go.
Copying game modes from an S Switch to your monitor
Apart from the default and the adjusted settings done on your monitor, you can quickly upload
customized game modes saved on other S Switch.
1. Set the picture mode of your monitor to one of the game modes (Gamer1 / Gamer2 /
Gamer3).
Do not plug or unplug S Switch while configuring game mode settings.