User's Manual

2016/6/7

Caution of RF module on US region

 Any changes or modifications not expressly approved by the grantee of this device could void the user's

authority to operate the equipment.

 This equipment must be installed and operated in accordance with provided instructions and the

antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm

from all persons and must not be co-located or operating in conjunction with any other antenna or

transmitter. End-users and installers must be provided with antenna installation instructions and

transmitter operating conditions for satisfying RF exposure compliance.

 Outdoor operations in the 5150 ~ 5250MHz, 5600~5650MHz band are prohibited.

 Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

 This device has no Ad-hoc capability for 5250~5350MHz and 5470~5725MHz.

 Outdoor operations in the 5470~5725MHz band are prohibited. This device could not be used in the

5600~5650MHz.

 The Device not operation in 5600~5650MHz.

 For operation within 5.15 ~ 5.25GHz / 5.47 ~5.725GHz frequency range, it is restricted to indoor

environment. The band from 5600-5650MHz will be disabled by the software during the manufacturing

and cannot be changed by the end user. This device meets all the other requirements specified in Part

15E, Section 15.407 of the FCC Rules.

 The user is cautioned that this device should be used only as specified within this manual to meet RF

exposure requirements. Use of this device in a manner inconsistent with this manual could lead to

excessive RF exposure conditions.

 FCC ID: JVPWDP02T & JVPWDP02R, FCC ID displayed on label.

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm between the radiator & your

body.

Note: The country code selection is for non-US model only and is not available to all US model. Per FCC

regulation, all WiFi product marketed in US must fixed to US operation channels only.