User's Manual

28 Starting and stopping presentations
Starting and stopping presentations
This section will guide you on how to start and stop a presentation using the product.
Getting ready
Make sure that all the connected devices have been powered on and ready for the presentation.
As the product could work with different projectors,
IFPs, TVs, or monitors with standard HDMI
ports, the steps required to start a presentation may vary according to the actual environment and
your display specifications. Follow the procedures below and refer to the specified sections for
details.
1. To start a presentation, see Starting presentation on page 28 for details.
2. To stop a presentation, see
Idle presentation on page 29 for details.
3. To start a split-screen presentation, see
Split screen presentations on page 30 for details.
4. To start a presentation with a mobile device, see
Presenting with mobile devices on page 32 for
details.
5. To control presentations via a touchscreen displays or mouse/keyboard see
Touch back on page
33
for details.
Starting presentation
1. Make sure power is supplied to the Host. See Connecting the HDMI cable and power on page 17
for more information.
2. Choose the HDMI source corresponding to the Host on the display. You will see the Guide
screen.
Depending on the purchased model, you may have different cable(s) on InstaShow Buttons. Connect the
InstaShow Button!s jack(s) to the corresponding input(s) of a laptop.
Guide
Screen