User's Manual

23 Installation
Pairing a Button and Host
A product set includes a Host and two Buttons, which are paired before shipment. In such a case,
you don!t need to pair them again. However, if you buy two or more product sets, and you want to
pair a Button with a different Host, you need to follow the instruction below. If you buy an additional
Button kit, and you want to pair the new Buttons with your Host, you need to follow the instruction
below as well.
When the Host is placed on a table
1. Make sure your Host is ready with power supply. Connect the Button!s USB-C" jack to the cor-
responding inputs of a laptop.
2. When the new Button is connected to the laptop, the LED indicator of the Button will flash red.
The Button is in pairing mode, waiting to pair with your Host.
If a Button nearby has been paired with a Host before, it will turn static green.
USB-C™