User's Manual

21 Installation
2. The LED indicator of the Button will flash green while the Button is starting up.
3. When the Button is ready to present, the LED indicator will turn solid green. Press the Present
key when the LED indicator turns green.
If you purchase an additional Button (via a Button Kit), please follow the process described below:
1. Follow the pairing instructions described in
Pairing a Button and Host on page 23.
2. Connect the Button!s USB-C" jack to the corresponding inputs of a laptop. See the illustration.
# If the Button encounters problems while pairing with the Host during startup the LED indicator will flash red.
Repeat the previous the process again until the LED turns solid green. See
LED indicators of the Button and
the Host on page 10
for more information on LED behavior.
# Handle the Button cable with care. Rough handling might cause defects.
# Pull/Push the plug instead of the cable when inserting or removing Buttons.
USB-C™