User's Manual

19 Installation
If you purchase an additional Button (via an Kit), please follow the process described below:
1. Follow the pairing instructions described in
Pairing a Button and Host on page 21.
2. Connect the Button’s HDMI and USB jacks to the corresponding inputs of a laptop. See the
illustration.
3. The LED indicator of the Button will flash green while the Button is starting up.
4. When the Button is ready to present, the LED indicator will turn solid green. Press the Present
key when the LED indicator turns green. .
• Handle the Button cable with care. Rough handling might cause defects.
• Pull/Push the plug instead of the cable when inserting or removing Buttons.
USB
3.0
HDMI
1.4