User's Manual
Table Of Contents
- Copyright
- Disclaimer
- BenQ ecoFACTS
- Introduction
- Installation
- Environment check
- Assembling the InstaShow Host
- Setting up the InstaShow Host
- Positioning the InstaShow Host antennas
- Connecting the HDMI cable and power
- Setting up and powering an InstaShow Button
- Pairing a InstaShow Button and InstaShow Host
- Waking up the InstaShow Host
- Storing InstaShow Buttons in the cradle
- Resetting a InstaShow Host
- Resetting a InstaShow Button
- Starting and stopping presentations
- Web management
- Troubleshooting
57 Web management
4. Pressing Apply to proceed.
• Firmware Upgrade/Driver Upgrade
Before executing any Firmware Upgrade/Driver Upgrade, please contact your BenQ regional
office for access to the upgrade files. Install the latest firmware and driver according to the following
sequence:
1. Button_Driver_xxxx.bin
2. Host_Driver_xxx.bin
3. Button_Firmware_xxx.bin
4. Host_Firmware_xxx.bin
You can change Mode to Firmware Upgrade or Driver Upgrade.
• Upgrades must follow the sequence listed above.
• Not every upgrade will require all of the 4 files listed above, if an upgrade file package features less than the 4
files above skip the missing file in the sequence.
1
4
2
3