User's Manual
Table Of Contents
- Copyright
- Disclaimer
- BenQ ecoFACTS
- Introduction
- Installation
- Environment check
- Assembling the InstaShow Host
- Setting up the InstaShow Host
- Positioning the InstaShow Host antennas
- Connecting the HDMI cable and power
- Setting up and powering an InstaShow Button
- Pairing a InstaShow Button and InstaShow Host
- Waking up the InstaShow Host
- Storing InstaShow Buttons in the cradle
- Resetting a InstaShow Host
- Resetting a InstaShow Button
- Starting and stopping presentations
- Web management
- Troubleshooting
50 Web management
Frame Rate controls the smoothness of video broadcast by the InstaShow Host. When Video
mode is selected you can change the Frame Rate for the video broadcast to High, Medium, or
Low. A higher frame rate features video with smoother motion, while a lower frame rate features
video with choppier motion.
Low Power mode For use when low power consumption is necessary, such as when the
laptop which the InstaShow Button is connected to only features a
USB 2.0 power connection. The use of Low Power mode will result
in a lower display quality and choppier video than Presentation
mode and Video mode.
When Low Power mode is selected, Picture Quality Mode cannot be
changed via the MODE key located on the InstaShow Button. If the user
presses the MODE key, the OSD will display the warning icon shown below
in the upper left-hand corner:
Frame Rate is only adjustable (its default value is set to High) when Video mode is selected. The Frame Rate
for Presentation mode and Low Power mode are both fixed to Low and cannot be adjusted.
Mode Scenario