User's Manual
Table Of Contents
- Copyright
- Disclaimer
- BenQ ecoFACTS
- Introduction
- Installation
- Environment check
- Assembling the InstaShow Host
- Setting up the InstaShow Host
- Positioning the InstaShow Host antennas
- Connecting the HDMI cable and power
- Setting up and powering an InstaShow Button
- Pairing a InstaShow Button and InstaShow Host
- Waking up the InstaShow Host
- Storing InstaShow Buttons in the cradle
- Resetting a InstaShow Host
- Resetting a InstaShow Button
- Starting and stopping presentations
- Web management
- Troubleshooting
42 Web management
Wireless Network
Click Wireless Network and you will see the Setting and Wi-Fi Radio Setup menu for the
InstaShow Host.
You can Enable or Disable a Wi-Fi connection to the InstaShow Host via Enable. The descriptions
for each setting is described below:
Setting Description
Enable The InstaShow Host broadcasts its SSID which allows users to log
into the web management interface via a wireless network. Refer to
Logging into the web management interface via a wireless network on
page 37 for more information.
Disable The InstaShow Host deactivates its SSID which prohibits users from
logging into the web management interface via a wireless network.
When Wireless Network is disabled users will only be able to log
into the web management interface via direct connection or LAN.
Refer to Logging into the web management interface via direct
connection on page 34 or Logging into the web management interface
via LAN on page 36 for more information.