User's Manual

6 Introduction
Overview
InstaShow Button
InstaShow Host
1. Present key with LED indicator
Press to start or stop presenting.
2. MODE key
Press to pair with InstaShow Host or to switch to
Video/Present mode.
3.
USB 3.0 connector
Connect to a computer or laptop.
4. HDMI 1.4 connector
Connect to a computer or laptop.
5. RESET
Poke at the RESET hole to reset the device if the
device stops responding.
1. Fixture parts for the Antennas
Refer to Assembling InstaShow Host on page 8
for more information.
2. DC 1.5A port
Connect to an adapter or a display using a Cable
USB A(M) to Micro B(M).
3. HDMI port
Connect to a display using a Cable HDMI A(M) to
A(M).
4. LAN port
Allow users to have access to the web
management through network.
5. PAIRING key
Press to pair with InstaShow Button.
6. RESET
Poke at the RESET hole to reset the device if the
device stops responding.
7. Power button with LED indicator
Press to turn InstaShow Host on and off.
8. Lid
Refer to Attaching InstaShow Host to the ceiling
on page 9 for more information.
4
3
1
2
RESET
Bottom of InstaShow Button
5
7
6
5
4
3
2
1
1
Alignment hole
Lid of InstaShow Host