User's Manual

8 Installation
Installation
This section will guide you on how to prepare the unit before its initial use.
As your InstaShow™ could work with different displays, the steps required to complete the
installation may vary according to the actual environment and your display specifications. Follow the
procedures below and refer to the specified sections for details.
1. Assemble InstaShow Host with the antennas. See Assembling InstaShow Host on page 8 for
details.
2. Connect InstaShow Host to the display and power properly. See Setting up InstaShow Host on
page 8 and Connecting the HDMI cable and power on page 11 for details.
3. Connect InstaShow Button to the desired devices and power properly. See Setting up and power
supply of InstaShow Button on page 13 for details.
4. Make sure that all the connected devices have been powered on. Press the source button of the
display and make sure that the HDMI source has been transmitted. See Pairing InstaShow Button
and InstaShow Host on page 16 for details.
Assembling InstaShow Host
Assemble InstaShow Host with two antennas by turning the antennas clockwise (right) and
counterclockwise (left) to fasten them tightly.
Setting up InstaShow Host
You are provided with four different ways to position InstaShow Host.