User's Manual

26 Troubleshooting
InstaShow Button
InstaShow Button
automatically
restarts sometimes.
Insufficient power
supply
• Make sure you use USB 3.0 as
the power supply for
InstaShow Button.
• If the USB 2.0 port is the only
option for the power supply
for InstaShow Button, try to
reduce the power
consumption of InstaShow
Button by changing Picture
Quality Mode to Low
Power in Web Management.
InstaShow Host
Nothing is shown
on the display at all.
The display is
switched off.
Switch on the display.
The wrong input is
selected.
Select the correct input.
The display cable is
not connected
properly.
Insert the HDMI cable between
InstaShow Host and the display
device again.
The display fails to
show InstaShow
Host’s output
resolution at 720p in
"Guild Screen" or
"Idle Screen".
Replace the display with a new
one that supports output
resolution at 720p.
InstaShow Host is in
Network Standby
Mode when network
standby function is
enabled.
Press present key of InstaShow
Button to start presentation.
InstaShow Host is in
HDMI Standby
Mode when HDMI
standby function is
enabled.
Briefly press the power button
on InstaShow Host or power
on the display (connected to
InstaShow Host with an HDMI
cable). InstaShow Host will
wake up automatically.
InstaShow Host is
powered off.
Briefly press the power button
on InstaShow Host.
Insufficient power
supply
Change power supply of
InstaShow Host to a power
adapter.
Category Problem Cause Solution