Operation Manual

Connection18
Connection
When connecting a signal source to the projector, be sure to:
1. Turn all equipment off before making any connections.
2. Use the correct signal cables for each source.
3. Ensure the cables are firmly inserted.
• In the connections shown below, some cables may not be included with the projector (see
"Shipping contents" on page 8). They are commercially available from electronics stores.
• The connection illustrations below are for reference only. The rear connecting jacks
available on the projector vary with each projector model.
*For updating the firmware.
1. USB cable*
2. VGA cable
3. HDMI cable
4. Component Video to VGA (D-Sub)
adapter cable
5. Video cable
6. Audio L/R cable
7. Audio cable
8. HDMI-Micro USB cable
6
5
7
1
3
4
3 8
3
2
7
Notebook or desktop
computer
A/V device
Speakers
Smartphone or
tablet PC