Operation Manual

32 How to adjust your monitor
*DDC/CI, short for Display Data Channel/Command Interface, which was developed by Video Electronics
Standards Association (VESA). DDC/CI capability allows monitor controls to be sent via the software for
remote diagnostics.
HDMI Auto
Switch
When this function is
activated, HDMI port will
be in the input auto select
loop. Otherwise, HDMI
can only be selected by
input select or by hot key.
Press the ENTER key to
select this option. Press the
or keys to change
the settings.
• ON
• OFF
Reset All Resets all mode, color and
geometry settings to the
factory default values.
Press the or keys to
change the settings.
• YES
• NO