Installation manual

ManualsBrandsBenQ ManualsProjector MountsUniversal Ceiling Mount

ᒵᐅձܚሯؑӤ࢜ޟߝ࡙

Select the desired suspension length

ᔅⷐ䈭䊑䊤䉬䉾䊃䈱㐳䈘䉕ㆬ䈹

ᔅⷐ䈭䊑䊤䉬䉾䊃䈱㐳䈘䉕ㆬ䈹㩷



࿋Ӥ࢜ߝ࡙࣏100mm ਢ

պ΢ᒳ൛(Part K)ઠː༄ЊཆЁ̛ޜڟӹᆇ

ጠĂᖇ־ػҜథВϤޜ(Part G) Ą



When the pipe is 100mm long

Fix the frame-mounted projector onto Ceiling

mount bracket (Part G) with Screw (Part K).



䊑䊤䉬䉾䊃䈱㐳䈘䈏

䊑䊤䉬䉾䊃䈱㐳䈘䈏㩷

100mm

䈱

ᤨ

䊈䉳㩷(Part K) 䉕૶↪䈚䈩䉦䊮䉼䊧䊋䊷ข䉍ઃ

䈔ᷣ䉂䈱䊒䊨䉳䉢䉪䉺䊷䉕ᄤ੗ๆ⌕ᑼ䊑䊤䉬䉾

䊃㩷(Part G) 䈮࿕ቯ䈜䉎䇯

 ࿋Ӥ࢜ߝ࡙࣏ 380mm оΰਢ

 When the pipe is over 380mm long

 䊑䊤䉬䉾䊃䈱㐳䈘䈏

䊑䊤䉬䉾䊃䈱㐳䈘䈏

380mm એ਄䈱ᤨ

એ਄䈱ᤨ

ϑઠʹࣈ്(Part I)ࣈʣҜథВϤޜ

(Part G)Ăϔպ΢ᒳ൛ޘ(Part L)ࠎ྆ʹࣈ

്Ăϔҁ΢ᒳ൛(Part K)ᖇ־ػʹࣈ്Ăశ

ݣպ΢ᒳ౾(Part F)ؚฉػᒳ൛ޘ(Part L)Ą

First insert the Height adjust outside pipe

(Part I) in the Ceiling mount bracket

(Part G), and then pass the Hexagon bolt

(Part L) through the Outer Sleeve and

tighten it with the Nyllon nut (Part F).

Lastly, secure the Outer Sleeve with the

Screw with Spring washer (Part K).

వ䈮ᄖ䉴䊥䊷䊑ౝ䈮䉝䉾䊌㩷(Part I) 䊷䊐䊧䊷

䊛㩷(Part G) 䉕⚵䉂ㄟ䉂䇮ᰴ䈮ᄖ䉴䊥䊷䊑䈮

౐ⷺᬀㄟ䊗䊦䊃㩷(Part L) 䉕ㅢ䈚䈩䊅䉾䊃㩷㩷㩷

(Part F) 䈪࿕ቯ䈚䇮ᦨᓟ䈮䊈䉳㩷(Part K) 䈪

ᄖ䉴䊥䊷䊑䈮࿕ቯ䈜䉎䇯

2-1

Ԋ၆׹ኇᐠ֜ഥԒӤ࢜؏᡽

Ceiling-mounted Projector hanger installation steps

䊒䊨䉳䉢䉪䉺䊷ᄤ੗ๆ⌕ᑼ䊑䊤䉬䉾䊃䈱ข䉍ઃ䈔䉴䊁䉾䊒

ሯӑ஠׹ኇᐠЛኤ࢜Ȃᚇھܻ׹ኇᐠ

㩷

Fix the support frame on the projector

వ䈝䊒䊨䉳䉢䉪䉺䊷ᡰᜬ䊐䊧䊷䊛䉕䊒䊨䉳䉢䉪䉺䊷䈮࿕ቯ䈜䉎

వ䈝䊒䊨䉳䉢䉪䉺䊷ᡰᜬ䊐䊧䊷䊛䉕䊒䊨䉳䉢䉪䉺䊷䈮࿕ቯ䈜䉎㩷



պ΢ᒳ൛(Part ̌)ઠᙚᒗ̛ޜ(Part A)ᖇ־ػӹ

ᆇጠϤ૮̌ĂЊཆढ࠷ᒳ൛̊۝Ă͟ઠͻᏸ࿬̰

(Part C)Ⴤᒳ൛ʙਔᖇ־ػӹᆇጠϤ૮̌Ą



Lock the Arm bracket (Part A) in the projector

hanging hole. If the Screw with fixed washer for

projector housin (Part ̌) is too long, lock the

supplied Nylon Pad (Part C) into the hanging hole

together with the projector.



䊈䉳 (Part ̌) 䉕૶↪䈚䈩䉦䊮䉼䊧䊋䊷㩷(Part A) 䉕

䊒䊨䉳䉢䉪䉺䊷ษ䉍ដ䈔ሹ䈮࿕ቯ䇯ข䉍ઃ䈔ᤨ䈮䊈

䉳䈏㐳䈜䈑䉎ᤨ䈲䊅䉟䊨䊮䊪䉲䊞䊷㩷(Part C) 䉕䊈

䉳䈫౒䈮䊒䊨䉳䉢䉪䉺䊷ษ䉍ដ䈔ሹ䈮࿕ቯ䈜䉎䇯



ϑઠӹᆇጠ̛ᆤޜ( Part D)Ăع༊ػᙚᒗ̛ޜ!!!!

( Part A)ʰծቡጌᒳ൛ѝ༊Ăϔպ΢࿬̰(Part E)

̅ᒳ౾(Part F)ᖇ־ػᒳ൛ʰĄ



Place projector bracket (Part D) to Arm bracket (Part A)

and then adjust the screws and then tighten the bolt with

the Flat Washer (Part E) and the Nyllon nut (Part F).



䊒䊨䉳䉢䉪䉺䊷䉰䊘䊷䊃 (Part D) 䉕䉦䊮䉼䊧䊋䊷䉰䊘䊷䊃 (Part A)㩷

਄䈻⟎䈐䇮䊈䉳䈱૏⟎䉕⺞ᢛ䈚䈩䈒䈣䈘䈇䇮ᰴ䈮䊪䉾䉲䊞 (Part E)

෸䈶䊅䉾䊃 (Part F)䉕䊈䉳䈮✦䉄ઃ䈔䉎䇯

ඝ;պ΢ڱ͟ьїቡጌᙚᒗ̛ޜڟ۝̟̌೉˱ؖ೉ʹĂծቡጌᙚ̛ࠧޜڟᒳ൛ѝ༊Ă̾਩ϫӹᆇጠ

̛ᆤޜڟ̌ѝĄ

Note: The user may adjust the rectangular hole on the arm holder to face inward or outward and

also adjust the bolt position on the arm holder to be in line with the position of the hole on the

projector bracke.

⸼䋺૶↪⠪䈲⥄ಽ䈪 ᜬ䈲䉍䈱㐳ᣇᒻሹ䉕ౝะ䈐ᚗ䈲ᄖะ䈐䈮⺞ᢛ䈚䇮 ᜬ䈲䉍䈱䊈䉳૏⟎䉕⺞ᢛ䈚

䈩䊒䊨䉳䉢䉪䉺䊷ᡰᜬ䊐䊧䊷䊛䈱ሹ૏⟎䈮ว䉒䈞䉎䇯