Operation Manual

Setting up the display 23

Connecting the touch module

Connect the USB cable on the display to a computer.

The touch module supports easy Plug-and-Play operations. There is no need to install

additional drivers on the computer.

Connecting power

1. Plug one end of the power cord into the AC IN jack on the display and the other end

into an appropriate power outlet (if the outlet is switched, turn on the switch).

2. Press the power switch to turn on the main power. The display will enter standby

mode and the power indicator will light up amber.

• The supplied power cord is suitable for use with 110-240V AC power only.

• The power cord and outlet illustrated may differ from the ones used in your region.

• Only use an appropriate power cord for your region. Never use a power cord which appears

damaged or frayed, or change the plug type on the power cord.

• Be aware of the power loading when you use extension cords or multiple outlet power boards.

• There are no user serviceable parts in this display. Never unscrew or remove any covers.

There are dangerous voltages inside the display. Turn off the power and unplug the power cord

if you intend to move the display.