Operation Manual

Setting up the display 13
Setting up the display
Mounting the display
You can install the display on a vertical surface with a suitable wall mounting bracket or
on a horizontal surface with the optional desktop stands. Please pay attention to the
following notes during installation:
• This display should be installed by at least two adult persons. Attempting to install this
display by only one person may result in danger and injuries.
• Refer the installation to qualified technicians. Improper installation may cause the
display to fall or malfunction.
Installing the display on a wall
1. Remove the desktop stands from the display if installed.
2. Place a clean, dry and lint-free cloth on a flat, horizontal and object-free surface.
Make sure that the size of the cloth is larger than the display.
3. Gently lay the display on the cloth with the LCD screen facing down.
4. Identify the wall mounting screw
holes on the back of the display
as shown in the illustration.
400 mm
(15.75")
200 mm (7.87")
(For T420)
*Screw type: M6
200 mm
(7.87")
400 mm (15.75")
200 mm
(7.87")
(For TL550)
*Screw type: M8
(For T650)
400 mm (15.75")
400 mm
(15.75")
*Screw type: M8
200 mm
(7.87")
200 mm (7.87")