Operation Manual
Table Of Contents
- Table of contents
- Important safety instructions
- Overview
- Positioning your projector
- Connecting to video equipment
- Using the projector
- Turning the projector on
- Selecting an input source
- Using the menus
- Securing the projector
- Adjusting the projected image
- Using the preset and user modes
- Fine-tuning the picture quality
- Advanced picture quality controls
- Selecting the aspect ratio
- Setting a wall color
- Hiding the image
- Locking control keys
- Freezing the image
- Adjusting the sound
- Using the test pattern
- Using the teaching templates
- Setting the lamp mode
- Controlling the projector through a Wired LAN environment
- Operating in a high altitude environment
- Turning the projector off
- On-Screen Display (OSD) menus
- Additional information
- Warranty and Copyright information
55
Using the projector
English
Source menu
Function Description
Quick Search
Allows the projector to search automatically for input sources. If the source
scan is On, the projector will scan for input sources until it acquires a signal. If
the function is not activated, the projector selects the last used input source.
HDMI Format
Selects an input source type for the HDMI signal. Auto is the default and
recommended setting. You can also manually select the source type. The
different source types carry different standards for the brightness level.
This function is only available when the HDMI signal is selected.
Audio Settings
See "Adjusting the sound" on page 41 for details.
Position
Displays the position adjustment page. To move the projected picture, use the
directional arrow keys. The values shown on the lower position of the page
change with every key press you made until they reach their maximum or
minimum. They will return to their factory preset values whenever the
projector is re-started.
This function is only available when the Component or PC signal
is selected.
Phase
Adjusts the clock phase to reduce picture distortion.
This function is only available when the
Component or PC signal is selected.
H. Size
Adjusts the horizontal width of the picture.
This function is only available when the Component or PC signal
is selected.