Operation Manual
Table Of Contents
- Table of contents
- Important safety instructions
- Overview
- Positioning your projector
- Connecting to video equipment
- Using the projector
- Turning the projector on
- Selecting an input source
- Using the menus
- Securing the projector
- Adjusting the projected image
- Using the preset and user modes
- Fine-tuning the picture quality
- Advanced picture quality controls
- Selecting the aspect ratio
- Setting a wall color
- Hiding the image
- Locking control keys
- Freezing the image
- Adjusting the sound
- Using the test pattern
- Using the teaching templates
- Setting the lamp mode
- Controlling the projector through a Wired LAN environment
- Operating in a high altitude environment
- Turning the projector off
- On-Screen Display (OSD) menus
- Additional information
- Warranty and Copyright information
50
Using the projector
English
On-Screen Display (OSD) menus
On-Screen Display (OSD) structure
Please note that the on-screen display (OSD) menus vary according to the signal type selected.
Main menu Sub-menu Options
Picture
Picture Mode Bright/Presentation/sRGB/Cinema/(3D)/User 1/User 2
Reference Mode Bright/Presentation/sRGB/Cinema/User 1/User 2
Brightness 0~50~100
Contrast 0~50~100
Color 0~50~100
Tint 0~50~100
Sharpness 0–15
Advanced...
Black Level 0 IRE/7.5 IRE
Noise Reduction 0-31
Color Temperature Cool/Normal/Warm/Lamp Native
Color Temperature
Fine Tuning
Red Gain 0–200
Green Gain 0–200
Blue Gain 0–200
Red Offset 0–511
Green Offset 0–511
Blue Offset 0–511
3D Color
Management
Primary Color Red/Green/Blue/Cyan/Magenta/Yellow
Hue 0–100
Saturation 0–100
Gain 0–100
Gamma Selection 1.6/1.8/2.0/2.2/2.4/2.5/2.6/2.8/BenQ
Brilliant Color On/Off
Rename User Mode User 1/User 2
Reset Picture Settings Current/All