User Manual

Controlling the projector remotely through a web browser22
Using the web control lock
This function is designed to prevent unauthorized people from maliciously changing the
projector settings through the Projector Network Display System.
To enable the function:
1. After your computer is connected to the projector, enter the address of the
projector in the address bar of your browser and press Enter.
2. Go to the Admin page of the Projector Network Display System.
3. Enter the current password.
4. Click ON in the Web Control Lock row.
The next time someone connects to this projector, the Projector Network Display
System page provides download and information only.
To disable the function:
1. Go to the Admin page of the Projector Network Display System.
2. Enter the current password.
3. Click OFF in the Web Control Lock row.
You can also use the OSD menu to toggle this function:
1. Go to the SYSTEM SETUP: Advanced > Security Settings > Change
Security Settings menu after opening the OSD menu system. Press MODE/
ENTER. The message “INPUT PASSWORD” appears. Enter the current password.
2. If the password is correct, the OSD menu returns to the Security Settings page.
Press to highlight Web Control Lock and press / to select On or Off.