User Manual

Controlling the projector remotely through a web browser20
Mail Setting
The Mail Setting page allows you to send an e-mail alert to your network administrator
once a projector system error is detected. The e-mail alert function is triggered by the
pre-defined projector system errors (see "Problems that trigger e-mail alert function" on
page 21). With appropriate e-mail configuration, your projector system works as an e-mail
client (such as SMTP-client*) that sends e-mail alert automatically to a delegated person
once a projector system error is detected.
Configure your mail settings first as follows. And save the settings with Apply. You can
first try the Mail Test function to check if the e-mail alert function works. Fill out the
fields carefully the messages could be sent successfully and the receiver could recognize
the e-mail alert easily. See "Example of an e-mail alert" on page 21 for an example.
• Mail Notification: Enable e-mail alert function by setting it to ON.
• SMTP Server: Input the server that provides SMTP mail service.
• User Name: Input the user account name of the specified SMTP server.
• Password: Input the password of the user account of the specified SMTP server.
• From: Input your e-mail address (which will be the sender of the e-mail alert) that
uses the specified SMTP server.
• Email Address: Input the e-mail address of the receiver of the e-mail alert.
• Alert Item: Select the problems that would trigger the e-mail alert function.
This function is available when network connection is made to ensure a successful e-mail delivery.
*: The SMTP protocol supports default TCP port number 25.
You can first try the Mail Test function to check if the Alert Mail works.