User Manual

Controlling the projector remotely through a web browser18
Basic
The Basic page allows you to change the password and set the maximum number of
connected computers. The number of connected computer may affect the network display
performance.You can also adjust the Projection Login Code, and AMX Device
Discovery settings here.
• Projector name: Name your projector here and click Apply.
• Web Control Lock: This function is designed to prevent unauthorized people from
maliciously changing the projector settings through the Projector Network Display
System. See "Using the web control lock" on page 22 for more information.
• Password Change: You can change the Admin password.
• Projection Login Code: If activated, you are not allowed to use the projector until
the code is entered.
If Projection Login Code is set to ON and User Defined Projection Login
Code is set to OFF, the system will generate a random 4-digit code.
If Projection Login Code is set to ON and User Defined Projection Login
Code is set to ON, you can decide a 4-digit code in Login (4 Digits). See "Using the
Projection Login Code" on page 23 for more information.
• AMX Device Discovery: If activated, the projector can be found by the AMX
control system.
• Reset to Default: The settings of Basic, Wired LAN, and Mail Setting will be
restored to factory default values.