User Manual

Controlling the projector remotely through a web browser12
Controlling the projector remotely through a
web browser
Once you have the correct IP address for the projector and the projector is on or in
standby mode, you can use any computer that is on the same local area network to control
the projector.
Projector Network Display System has two authorities. With access to Admin, you
can setup all functions. Otherwise, you can only setup the following functions:
• Download
• Virtual Keypad
• Display Setting
• Picture Setting
• Information
• Crestron
Download
Make sure your projector is connected to a computer. See "Connecting the projector with
your computer" on page 5 for instructions.
The main page of the Projector Network Display System appears. This web page
provides access to a variety of functions with a simple click.
Click Download to save QPresenter software on your computer. See "Installing
QPresenter" on page 8 for details.
• Supported web browsers are as follows:
- Internet Explorer 7.0 / 8.0 / 9.0 / 10.0 / 11.0
- Chrome 36.0.1985.125
- Safari 5.1.2
- Firefox 10.0
• The screenshots in this manual are for reference only, and may differ from the actual design.