User Manual

25 How to assemble your monitor hardware
Portrait installation
Plates required for portrait installation:
7. If you intend to calibrate the display’s color
by a colorimeter, slide to open the cover on
the top plate so the colorimeter can be
installed.
Follow the instruction manuals of the colorimeter you
purchased and the provided software (e.g.,
Palette Master
Element
) to complete the installation and calibration
process.
SW270C came with shading hood for landscape installation only. If portrait installation is desired, the compatible
shading hood is SH270, which is sold separately. Visit BenQ website for more information.
L2
Lt
R2
Rt
L1
R1
top plate
1. Prepare for the shading hood installation.
Place the monitor upright on its stand on a flat even
surface. Make sure the monitor is rotated to the
portrait mode as instructed in Rotating the monitor on
page 29.
Follow the illustrations to complete the installation
carefully.
2. Install the right hoods.
Align the arrow on plate (R1) with the one on plate (R2)
and attach them together. Slide plate (R2) to the end as
illustrated.
Align the arrow on plate (Rt) with the one on plate (R1)
and attach them together. Slide plate (R1) along with
plate (R2) to the end as illustrated.
R2
Rt
R1