User Manual

Select Calibration 1, Calibration 2, or Calibration 3 to save the calibration result into the monitor. If you

want to get more precise result, change the patch size to Medium or Large. Yet it will take more time to

calibrate. After all settings finish, click Start Measurement to calibrate the monitor. Before calibrating, tilt the

monitor up to ensure that the colorimeter snaps onto the monitor.

Note:

• Be sure you have the administrator privilege before selecting the system level. Otherwise, you may not be

able to build the ICC profile on the operating system.

• If you wish to maximize compatibility with other software (e.g., Photoshop), choose V2 in Profile Version,

and Matrix in Profile Type.

Step 1 Step 2

Before calibrating, tilt the monitor up to ensure that the colorimeter snaps onto the monitor.

In Advanced Mode