Owners manual

Operation 65
FUNCTION DESCRIPTION
Standby
Settings
MHL Charging
Enable the charging function to mobile devices via HDMI/MHL
interface when the system is under standby mode.
When MHL Charging is off:
1. Under operation mode, system can charge the devices
when they are connected to the projector via HDMI/MHL
port. When the detected source is not HDMI/MHL, the
projector can STILL charge the devices, no matter which
source is detected.
2. Under standby mode, system will not charge the devices
when they are connected to the projector via HDMI/MHL
port.
When MHL Charging is on:
1. Under operation mode, system can charge the devices
when they are connected to the projector via HDMI/MHL
port. When the detected source is not HDMI/MHL, the
projector can STILL charge the devices, no matter which
source is detected.
2. If the projector goes from operation mode to standby mode
while the devices is always connected during this period, the
projector will continue to charge them even it is turned off.
3. Under standby mode, system will charge the devices when
they are connected to the projector via HDMI/MHL port.
Network
Settings
See “BenQ Network Projector Operation Guide” for details.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: User 1,
User 2, Projector Installation, Color Space
Conversion, High Altitude Mode, Security Settings,
Baud Rate and Network Settings
5. SYSTEM SETUP: Advanced menu