Owners manual

Operation

FUNCTION DESCRIPTION

Closed Caption

Closed Caption Enable

Activates the function by selecting On when the selected input

signal carries closed captions.

• Captions: An on-screen display of the dialogue, narration, and

sound effects of TV programs and videos that are closed

captioned (usually marked as "CC" in TV listings).

Set your screen aspect ratio to 4:3. This function is

not available when the aspect ratio is “16:9”,

“16:10” or “Real”.

Caption Version

Selects a preferred closed captioning mode. To view captions,

select CC1, CC2, CC3, or CC4 (CC1 displays captions in the

primary language in your area).

Standby

Settings

Network

Enable network standby mode

Selecting On enables the function, and the projector can be

monitored or controlled over a network when it is in standby

mode.

Switch to normal standby mode

Sets the timer to switch to normal standby mode.

Microphone

Selecting On enables the function, and the microphone can be

used even in standby mode.

Monitor Out

Selecting On enables the function. The projector can output a

VGA signal when it is in standby mode and the COMPUTER 1

and MONITOR-OUT jacks are correctly connected to devices.

See "Connecting a monitor" on page 23 for how to make the

connection.

Enabling this function slightly increases the

standby power consumption.

The Monitor Out only works when an appropriate

D-Sub input is made to the COMPUTER 1 jack.

Audio Pass Through

The projector can play sound when it is in standby mode and the

corresponding jacks are correctly connected to devices. Press

/ to choose the source that you wish to use. See

"Connection" on page 21 for how to make the connection.

Enabling this function slightly increases the

standby power consumption.

5. SYSTEM SETUP: Advanced menu