Owners manual

Operation 63
FUNCTION DESCRIPTION
High Altitude
Mode
A mode for operation in high altitude areas. See "Operating in a
high altitude environment" on page 45 for details.
Audio Settings
Allows you to enter the audio setting menu. See "Adjusting the
sound" on page 46 for details.
Mute
Sets the mute function.
Volume
Adjusts the audio volume level.
Microphone Volume
Adjusts the microphone°¶s audio volume level.
Power On/Off Ring Tone
Sets the power on/off ring tone.
Lamp Settings
Lamp Mode
See "Setting Lamp Mode" on page 68 for details
Reset lamp timer
See "Resetting the lamp timer" on page 73 for details.
Lamp Information
See "Getting to know the lamp hour" on page 68 for details on
how the total lamp hour is calculated.
Security
Settings
Change Password
You will be asked to enter the current password before changing
to a new one.
Change Security Settings
Input current password to activate Power On Lock and Web
Control Lock functions.
Power On Lock
See "Securing the projector" on page 34 for details.
Web Control Lock
See “BenQ Network Projector Operation Guide” for details.
Baud Rate
Selects a baud rate that is identical with your computer’s so that
you can connect the projector using a suitable RS-232 cable. This
function is intended for qualified service personnel.
Te s t P a t t e r n
Selecting On enables the function and the projector displays the
grid test pattern. It helps you adjust the image size and focus and
check that the projected image is free from distortion.
5. SYSTEM SETUP: Advanced menu