Owners manual

Operation 37
2. Press / until your desired signal is selected
and press Mode/Enter.
Once detected, the selected source information
will display on the screen for seconds. If there is
multiple equipment connected to the projector,
repeat steps 1-2 to search for another signal.
• The brightness level of the projected image
will change accordingly when you switch
between different input signals. Data
(graphic) "PC" presentations using mostly
static images are generally brighter than
"Video" using mostly moving images (movies).
• The input signal type effects the options available for the Picture Mode.
See "Selecting a picture mode" on page 40 for details.
• The native display resolution of this projector is in a 16:10 aspect ratio.
For best display picture results, you should select and use an input
signal which outputs at this resolution. Any other resolutions will be
scaled by the projector depending upon the 'aspect ratio' setting, which
may cause some image distortion or loss of picture clarity. See
"Selecting the aspect ratio" on page 38 for details.
Changing Color Space
In the unlikely event that you connect the projector to a DVD player via the
projector's HDMI input and the projected picture displays wrong colors, please
change the color space to YUV.
1. Press Menu/Exit and then press / until the SOURCE menu is selected.
2. Press to select Color Space Conversion and press / to select a
suitable color space.
This function is only available when the HDMI input port is in use.
Magnifying and searching for details
If you need to find the details on the projected picture, magnify the picture. Use the
direction arrow keys for navigating the picture.
•Using the OSD menu
1. Press Menu/Exit and then press / until the DISPLAY menu is selected.
2. Press
to select Digital Zoom and press Mode/Enter. The Zoom bar
displays.
3. Press on the projector repeatedly to magnify the picture to a desired size.
4. To navigate the picture, press Mode/Enter to switch to the paning mode and
press the directional arrows ( , , , ) to navigate the picture.
5. To reduce size of the picture, press Mode/Enter to switch back to the zoom in/
out functionality, and press AUTO to restore the picture to its original size.
You can also press repeatedly until it is restored to the original size.