Owners manual

Operation 31
2. Press to select Keystone and press Mode/
Enter.
3. Press / / / to adjust the keystone values.
Adjusting corner fit
Manually adjust four corners of the image by setting the horizontal and vertical values.
•Using the OSD menu
1. Select Corner Fit in the DISPLAY menu and
press Mode/Enter.
2. Press /// to select one of the four
corners and press Mode/Enter.
3. Press / to adjust vertical values from 0 to 60.
4. Press / to adjust horizontal values from 0 to
60.
•Using the QUICK INSTALL key
1. Press QUICK INSTALL on the remote control.
2. Press to select Corner Fit and press
Mode/Enter.
3. Follow the steps 2~4 in the above section.