W6000 Software/RS-232 Programming Guide Revision 1 BenQ W6000 RS-232 Programming Guide (Revision 1) 1 of 6
BenQ W6000 RS-232 Programming Guide (Revision 1) 2 of 6 Communication Settings The default settings for the RS-232 COM port are as follows: Baud Rate: Parity: Data bits: Stop bits: Flow Control: 115,200 None 8 1 None RS-232 Connector Information The pin-out for the RS-232 control port is as follows: Pin 1 2 3 4 5 6 7 8 9 Description No Connection Receive Data Transmit Data No Connection Ground No Connection RTS (Not needed if Flow Control set to None) CTS (Not needed if Flow Control set to None) No Co
BenQ W6000 RS-232 Programming Guide (Revision 1) 3 of 6 Controlling the Projector Basics To turn on the projector via RS-232, you will need to connect to the projector and send the following ASCII code: X001X To turn the projector off send the following ASCII code string: X002X Common Operational Functions ASCII Code X000X X001X X002X X131X X132X X133X X135X X139X X140X X149X X003X X004X X005X X006X X007X X008X X009X X093X Function RS232 Communication Test Power ON Power OFF Input Source -- Video Input
BenQ W6000 RS-232 Programming Guide (Revision 1) 4 of 6 Advanced Operational Functions ASCII Code X013X X014X X015X X016X X041X X044X X045X X046X X047X X048X X049X X052X X068X X069X X070X X071X X072X X073X X074X X075X X081X X091X X092X X095X X096X X099X X100X X101X X103X X104X X112X X113X X114X X115X X116X X117X X118X X121X X122X Function Save DB Min/Max aperture Display DB calibration full white pattern(DB full off) Close DB calibration full white pattern Restore default DB max/min position Picture Mode
BenQ W6000 RS-232 Programming Guide (Revision 1) X123X X124X X125X X126X X127X X128X X151X X152X X154X X175X X182X X183X X221X X222X X223X X224X X225X X226X X227X X229X X231X X232X X233X X234X X252X X258X X260X X287X X350X X400X X401X X900X X997X 5 of 6 Language -- German Language -- Italian Language -- Spanish Language -- Russian Language -- Traditional Chinese Language -- Simplified Chinese Reset Lamp Timer(User) Reset Lamp Timer(Factory) Auto Function for PC Timings Burn-In Mode OFF Burn-In Mode ON in
BenQ W6000 RS-232 Programming Guide (Revision 1) 6 of 6 Z005R+0000Z Lamp Hours (Factory) -- Whisper Mode Z005R+0000ZZ0_5(read data)Z Z007R+0000Z Dust Filter Hours Z007R+0000ZZ0_7(read data)Z Z017R+0000Z Color Temperature Z017R+0000ZZ0_17(read data)Z Z033R+0000Z Residual Burn-In Time (hours) Z033R+0000ZZ0_33(read data)Z Z034R+0000Z Burn-In On Time (mins) Z034R+0000ZZ0_34(read data)Z Z035R+0000Z Burn-In Off Time (mins) Z035R+0000ZZ0_35(read data)Z Z038R+0000Z Burn On/Off Cycle Z038R+0000
