User manual

11
Overview
English
Remote control
1. Source selection keys (COMPONENT, VIDEO,
S-VIDEO, HDMI, PC)
Selects an input source for display.
The COMPONENT key toggles between
Component 1 and Component 2.
2. LASER
Emits visible laser pointer light for presentation
purposes.
3. MENU/EXIT
Turns on the On-Screen Display (OSD) menu.
Goes back to previous OSD menu, exits and saves
menu settings.
4. Arrow/Keystone keys (Left / , Up / ,
Right / , Down / )
Moves the current On-Screen Display (OSD)
menu selection in the direction of the arrow
being pressed when the OSD menu is activated.
Manually corrects distorted pictures resulting
from an angled projection.
5. ENTER
Activates the selected On-Screen Display (OSD)
menu item.
6. BLANK
Used to hide the screen image.
7. VOLUME+/VOLUME-
Adjusts the sound level.
8. POWER
Toggles the projector between standby mode
and on.
9. FREEZE
Freezes the projected image.
10. TEST PATTERN
Displays the test pattern.
11. BRIGHTNESS
Adjusts brightness.
12. CONTRAST
Adjusts contrast.
13. AUTO
Automatically determines the best picture
timings for the displayed image.
14. ASPECT
Selects the display aspect ratio.
15. MUTE
Toggles projector audio between on and off.
16. MODE
Depending upon the input signal in use, selects
an available picture mode.
Operating the LASER pointer
The Laser Pointer is a presentation
aid for professionals. It emits red
colored light when you press it and
the indicator lights up red.
The laser pointer is not a toy. Parents
should be mindful of the dangers of
laser energy and keep this remote
control out of the reach of children.
Do not look into the laser light window or
shine the laser light beam on yourself or
others. See the warning messages on the back
of the remote control prior to using it.
9
16
10
15
3
6
7
1
2
5
4
8
11
12
13
14
I
I