User`s guide

ManualsBrandsBenQ ManualsComputer equipmentSP0005

SP0005 / SP0008 / SP0016

5/8/16-Port

Fast Ethernet Switch

User’s Guide

Summary of content (24 pages)

PAGE 1
SP0005 / SP0008 / SP0016 5/8/16-Port Fast Ethernet Switch User’s Guide
PAGE 2
FCC Warning This equipment has been tested and found to comply with the limits for Class A & Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this user's guide, may cause harmful interference to radio communications.
PAGE 3
1. Introduction .............................................................................. 1 1.1. Product Overview .............................................................................. 1 1.2. Features & Specifications ................................................................... 2 1.2.1 Features ..................................................................................................... 2 1.2.2. Technical Specifications ............................................................
PAGE 4
1. 緒論 ..........................................................................................10 1.1. 產品簡介 ........................................ 10 1.2. 特性 & 規格 ......................................................................................... 11 1.2.1 產品特性 ..................................................................................................11 1.2.2. 技術規格 .................................................................................................11 1.2.3. 外觀規格 .................
PAGE 5
1. Introduction 1.1. Product Overview This SP0005/SP0008/SP0016 high performance Fast Ethernet switch provides five/eight/sixteen Fast Ethernet ports to segment network traffic, extend Fast Ethernet connection distance, and convert data packets between different transmission speeds. This Fast Ethernet Switch provides shielded RJ-45 ports both with 10Base-T and 100Base-TX Auto-negotiation capability and MDI/ MDI-X auto crossover. All ports in this switch support Full-Duplex and HalfDuplex operation modes.
PAGE 6
1.2. Features & Specifications 1.2.1 Features • Compliant with IEEE 802.3 10Base-T Ethernet and 802.3u 100Base-TX Fast Ethernet Standards. • Provides 5/8/16 ports for 10Base-T/100Base-TX, standard RJ-45 connectors. • All RJ-45 ports supports 10Base-T/100Base-TX and Full-Duplex/Half-Duplex Auto-negotiation function. • Supports MDI/MDI-X auto crossover. • Supports store-and-forward switching mechanism. • Plug-and-Play • Performs non-blocking full wire speed rate.
PAGE 7
1.2.3.
PAGE 8
1.3. Product outlook and terminology 1.3.1. SP0005 Top View Front View Rear View WIDTH * DEPTH * HEIGHT = 162*103*32 mm 1.
PAGE 9
1.3.2. SP0008 Top View Front View Rear View WIDTH * DEPTH * HEIGHT = 162*103*32 mm 1.
PAGE 10
1.3.3. SP0016 Top View Front View Rear View WIDTH * DEPTH * HEIGHT = 301*125*32 mm 1.3.4. Terminology PWR: This Green LED lights when the power adapter is mounted LINK/ACT 10/100: The Yellow LED lights when there is a valid 10-Base data linked on the port. And Green LED lights for 100-Base data linked. LED lights blinking when either 10-Base or 100-Base data is transmitted. 1.
PAGE 11
1.4. Package contents The package should contain the following items: SP0005/SP0008/SP0016 x 1 AC power adapter x 1 This User’s Guide IF any item is found missing or damaged, please contact your local Benq reseller for replacement. 1.
PAGE 12
2. Installation 2.1. Operating Environment This switch must be installed and operated within the limits of specified operating temperature and humidity (see previous section under Specifications). • Do not place objects on top of the unit. • Do not obstruct any vents at the sides of the unit. • Do not position the unit near any heating source such as heater, radiator, or direct exposure to sun. • Prevent entering of water and moisture into the unit. • If necessary, use dehumidifier to reduce humidity.
PAGE 13
3. Trouble Shooting The SP0005/SP0008/SP0016 can be easily monitored by its LED indicators. Please follow the troubleshooting steps below to solve any problem you may encounter during installation or implementation of the SP0005/SP0008/ SP0016. 1. Power LED is not lit Check if the power cord is properly connected to the external power adapter and the power outlet. Make sure the DC power jack is firmly plugged into the power socket of the switch. 2.
PAGE 14
1. 緒論 1.1. 產品簡介 SP0005/SP0008/SP0016 高性能快速以太網交換機具有 5/8/16 個快速以太網端口，可將數據在不同速度的網絡之間進行交換並延長傳輸距離。每端口均為具有 MDI/MDI-X 自適應及 10Base-T/100Base-TX 自適應的標準 RJ-45 接口。且均可自適應全雙工 / 半雙工模式。主要用以增加網絡帶寬來提高性能，如圖 1-1 所示。 Windows 98/95/2000 ADSL/Cable modem Windows Me/XP/NT Linux OS Server Mac OS 圖 1-1 SP0005/SP0008/SP0016 採用存儲─轉發機制，可對數據包進行校驗後，再進行過濾及轉發，並且每個端口都具有獨立 LED 指示燈用以監視工作狀態。緊湊的設計使得設備可以方便的放在桌面或者挂置於牆上及桌側以方便電纜連接。 1.
PAGE 15
1.2. 特性 & 規格 1.2.1 產品特性 • 遵從 IEEE 802.3 10Base-T 及 802.3u 100Base-TX 快速以太網標準。 • 具有 5/8/16 個 10Base-T/100Base-TX 標準 RJ-45 接口。 • 所有均支持 10Base-T/100Base-TX 及全雙工 / 半雙工自適應。 • 支持 MDI/MDI-X 自適應。 • 存儲─轉發機制。 • 即插即用。 • 無阻塞全線速轉發。 • 具有最大 4K/2K/8K (5/8/16 ports) MAC 地址表 / 地址散列運算自學習功能。 • 支持 Aging 功能與 802.3x 全雙工流控制及半雙工背壓流控制。 • 128K/128K/512K (5/8/16 ports) 緩存。 • 地址自學習，自釋放及地址漫游功能。 • 10Base-T 及 100Base-TX 網絡間簡單經濟的連接方式。 • 前面板狀態指示燈。 • 同桌面大小。 • 可壁挂設計。 1.2.2. 技術規格以太網標準 IEEE 802.3 10Base-T, 802.
PAGE 16
1.2.3. 外觀規格電源 50-60Hz 外置電源適配器工作溫度 0°C ~ 50°C (32°F ~122°F) 存放溫度 -20°C~ 70°C (-4°F ~ 158°F) 工作濕度 10% ~ 90% 非冷凝輻射標準 FCC part 15 Class B, CE Mark, VCCI Class B, C-TICK for SP0005 & SP0008 FCC Class A, CE Mark, VCCI Class A, C-TICK for SP0016 安全標準 UL/CSA 外部尺寸 162mm x 103mm x 32mm (SP0005) 162mm x 103mm x 32mm (SP0008) 301mm x 125mm x 32mm (SP0016) 淨重 250g (SP0005); 250g (SP0008); 540g (SP0016) 1.
PAGE 17
1.3. 產品外觀及術語 1.3.1. SP0005 上視圖前視圖後視圖長 * 寬 * 高 = 162*103*32 mm 1.
PAGE 18
1.3.2. SP0008 上視圖前視圖後視圖長 * 寬 * 高 = 162*103*32 mm 1.
PAGE 19
1.3.3. SP0016 上視圖前視圖後視圖長 * 寬 * 高 = 301*125*32 mm 1.3.4. 術語 PWR: 接通電源後，綠燈點亮。連接 / 工作 10/100: 連接 10 兆網絡時，黃燈點亮。連接 100 兆網絡時，綠燈點亮。數據傳輸時，黃燈或綠燈均會閃爍。 1.
PAGE 20
1.4. 產品包裝包裝中應包括如下部件： SP0005/SP0008/SP0016 x 1 交流電源適配器 x 1 本用戶手冊如有任何部件缺失或損壞，請與本地 Benq 經銷商聯繫調換。 1.
PAGE 21
2. 安裝 2.1. 工作環境本設備必須在指定的工作溫度及濕度中安裝及工作〈詳見前述章節〉。 • 請勿將任何物品置於設備頂部。 • 請勿阻塞設備任何一側的通風口。 • 請勿將設備放置於任何熱源附近。 • 放置水或者濕氣進入設備內部，如有必要請用除濕器除去濕氣。 • 避免灰塵沾染。 • 在設備與環境之間留出空間，以散發設備內部產生的熱量。 2.2. 網絡連接本交換機上的 RJ-45 端口具有 MDI/MDI-X 自適應功能，可使用直連網線與網絡相連。使用 RJ-45 線纜一端與本設備背板上的 RJ-45 端口相連，另外一端連接至網絡接口上。同樣將其他端口一一連接好，所有的雙絞線必須遵從 EIA/TIA 568 規範以及各類雙絞線傳輸距離限制。當纜線連接至網絡端口且電源打開後，綠色的連接 / 工作 10/100 燈會點亮 (100-Base 自適應 )。 2.3. 連接電源將電源適配器輸出端連接至背板電源接口，電源適配器連接至電源插座，綠色電源指示燈將會點亮。 2.
PAGE 22
3. 故障排除本設備可由面板指示燈觀察系統狀態。請按如下步驟排除安裝交換機過程中所遇到的故障。 1. 電源燈不亮檢查電源線是否正確連接至電源插座，電源輸出端口是否正確插入交換機背面的電源接口。 2. 100M 連接 / 工作 ( 綠 ) 接入 100M 網絡時不亮 • 檢查電源是否正確連接及電源是否打開。 • 檢查網絡線纜是否正確連接交換機和網絡。 • 檢查雙絞線是否遵從 EIA/TIA 568 和 5 類線規範。請執行以下檢查步驟： • 使用其他可以正常使用的 RJ-45 線纜代替現有線纜，以確認線纜沒有故障。 • 連接至設備上其他端口，如果可以正常工作則可以確定此端口已失效，請聯絡當地 Benq 經銷商。 • 確認所有設備均連接至網絡。 • 確認所有連接至交換機的設備上，網絡卡安裝正確並正常工作。 [!] 如故障依舊請聯繫您的經銷商。 3.
PAGE 23
Benq Network Products Limited Warranty A. LIMITED WARRANTY Benq Corporation (“Benq”) warrants the Benq network product you have purchased from Benq or from an Benq Authorized Reseller to be free from defects in materials and workmanship under normal use during the warranty period of one year from the date of purchase. Your original purchase invoice (sales receipt), showing the date of purchase of the network product, is your proof of the date of purchase.
PAGE 24
Benq Authorized Service Provider; (e) improper transportation or packing when returning the network product to Benq or an authorized Service Provider; or (f) unusual physical or electrical stress or interference, failure or fluctuation of electrical power, lightening, static electricity, fire or acts of God.