User Manual

Using Your Phone 63
•
Text Alignment: Used to select the type of text alignment for the
message's content.
3. After you have finished editing the message, press . A screen
in which you can edit the recipient's number will appear. There
are two ways you can enter the recipient's phone number:
• Key in the recipient's phone number in the number editing
screen.
• Before entering any phone number, you can press (Select)
and then select a recipient from the list of contacts in the Phone
Book. Follow the steps below:
a. Press to scroll to the name of contact, and then
press (Select) to select that contact.
b. The display will show all the phone numbers stored
for the contact you selected. Press (Select) to
select the desired phone number.
8 If the number is too long, press to display the
complete number.
c. After the number has been selected, you must press
to return to the list of contacts in the Phone
Book. A check mark will appear beside the contact
whose number you selected as recipient for your
message. You can use the same steps to select the
numbers of other contacts.
d. After you have selected all the numbers you wish to
dial, press and the display will show all these
numbers.
4. After the numbers to be dialed have appeared on the screen,