User's Manual
Table Of Contents
- BenQ.com
- Disclaimer
- FCC regulations
- Package contents
- Front-right view
- Left side view
- Rear view
- Installing the battery
- Turning the device on/off
- Using the touchscreen
- Using Touch zone
- Basic setup
- Setting time
- Setting BenQUtility
- 1. To launch it you can go to Programs > BenQUtility.
- 2. Tap On in WLAN/Bluetooth.
- Using WLAN
- 1. Tap and drag the scroll box of WLAN to On in BenQUtility.
- 2. Setup the WLAN access point according to the information provided by your ISP. You may be requested to enter a password. Contact the service provider for information required to make the connection.
- 3. Confirm with OK to exit BenQUtility. When the WLAN connection is made successfully, the WLAN indicator on the right lights up in blue. And you are ready to activate programs that require network connectivity.
- Using the microSD card
Connect the small end of the provided USB extension cable to
your device, and another end to the USB connection cable. And
then you are ready to connect your device to another USB
device.
Your device can also be connected to a computer and works as a
USB mass storage device. For details, refer to “USB Client” in the
user manual.
Connecting with a stereo
headset