Connection 16 Connecting the AV inputs 1. Connect the AV IN jack on the display to the output jack on an A/V device (such as a VCR) using an appropriate video cable. 2. Connect the VCR’s audio output jacks to the AV IN jacks on the display using a suitable audio cable. 3. To view images from this input, press the INPUT button on the remote control to switch to respective input source.
17 Connection Connecting the coaxial output To use coaxial out for acoustic applications: 1. Use coaxial cable to connect via COAX OUT to your audio equipment. 2. Plug in power cord, and switch power on. Coaxial cable Audio equipment The applicable cable is not supplied and should be purchased separately.
Connection 18 Connecting the video output For computer: 1. Use D-Sub cable and audio cable to connect from VGA OUT and EARPHONE to the respective jacks of the devices. 2. Plug in power cord, and switch power on. 3. Press on the remote control to turn on the display. Press INPUT to switch to PC port. Set internal computer as VGA output or multi-screen display..
19 Connection Connecting to serial port Directly connect the computer to RS232 ports on the input/output terminals. Serial cable Computer • The applicable cable is not supplied and should be purchased separately. • This connection is applicable to straight-through serial cables only. • After using serial port line to connect central control equipment and machine, certain function of the machine can be controlled via central control equipment, such as: machine on/off, and adjustment of sound volume, etc.
Connection 20 Connecting power Plug one end of the power cord into the Power jack on the display and the other end into an appropriate power outlet (if the outlet is switched, turn on the switch). • The supplied power cord is suitable for use with 100-240V AC power only. • The power cord and outlet illustrated may differ from the ones used in your region. • Only use an appropriate power cord for your region.
21 Using the touch screen Using the touch screen You can use the optical touch screen to control your operating system. The touch screen can emulate basic mouse functions and supports multi-touch functions for Windows 7/ 8*. The following table shows a list of gestures you can use on the touch screen. • Ensure that you have installed the USB cable on the display to a computer.
Using the touch screen OS functions Gesture actions For Windows Vista and Windows 7 Drag one finger left or right. Selection Quickly drag your finger (Flick) in a desired direction. Pan up / Pan down / Back / Forward Multi-touch functions For Windows 7 - Home Premium, Professional, Enterprise and Ultimate versions 1. Press on the target. 2. Tap the screen with another finger. 3. Release the second finger. Right-click Drag one or two fingers up or down.
23 Using the touch screen OS functions Gesture actions • Move two fingers in opposing directions. • Use one finger to pivot around another. Supported by specific applications Tap two fingers simultaneously. The target should be the midpoint between the fingers. Supported by specific applications For Windows XP, Windows Vista and Windows 7 Press and hold for 4 seconds.
Using the touch screen Gesture 24 Description Slide to pan Slide is primarily used for panning interactions but can also be used for moving, drawing or writing. Slide can also be used to target small, densely packed elements by scrubbing (sliding the finger over related objects such as radio buttons). Swipe to select, command, and move Sliding the finger a short distance, perpendicular to the panning direction, selects objects in a list or grid (ListView and GridLayout controls).
25 Using the touch screen Important instructions for using the touch screen Please clean the frame when there is sign of malfunction on the touch screen. • Before you clean the screen, make sure the display is turned off, and unplug the power cord. • Remove dust or dirt from the screen and the infrared plastic filter periodically. It is suggested using a small amount of alcohol to clean the infrared plastic filter.
Menu operations 26 Menu operations One touch menu operation At the bottom middle position of the screen as the starting point, use a touch pen to drag toward center position of the screen, as shown below, to bring up the menu. Setting menu Input setting Press INPUT on the remote control or use a touch pen dragging from the bottom middle to the center of the screen to bring the setting menu.
27 Menu operations Brightness setting Press INPUT on the remote control or use a touch pen dragging from the bottom middle to the center of the screen to bring the setting menu. Input Light Volume More Backlight • Press on the remote control or directly click Light icon with touch pen to enter brightness setting menu. • Press / on the remote control or drag brightness adjustment progress bar with the touch pen to adjust brightness.
Menu operations 28 • Press MUTE on the remote control or directly click with the touch pen to enable or disable mute. • Press BACKon the remote control or click blank area outside menu with the touch pen to exit menu. More settings Press on the remote control or directly click More icon with touch pen to enter more settings.
29 Menu operations The user applicable storage space varies from pre-installed apps and images occupancies at the total memory space. VGA settings When the input source is set to VGA, press MENU on the remote control or use a touch pen dragging from the bottom middle to the center of the screen to bring the setting menu.
Menu operations 30 Screen settings When the input source is not set to Andriod, Press MENU on the remote control or use a touch pen dragging from the bottom middle to the center of the screen to bring the setting menu. Brightness B r i g h t n e ss C ontrast Contrast Hue Sharpness Color Colo o r Temp Cold Classroom Standard • Press /// on the remote control or use a touch pen to select each option and press ENTER on the remote control or directly click with the touch pen to confirm.
31 Menu operations Annotation menu Under any input source, place two fingers with about 20~50 mm spacing on the screen for more than two seconds to bring the annotation menu as below. The remote control is not capable of notation operations. Icon Function Description Annotation menu Pop up sub-menu. Return Main interface Click to return to previous operation interface. Click to return to main interface of Android system. Annotation brush Click to make annotation in the picture.
Menu operations 32 Android system interface Main interface • Press / on the remote control to select icons at the bottom and press ENTER to execute the program, or directly tap the icon with a touch pen. • Press HOME on the remote control or Home button at the bottom of front panel to return to the main interface. EZWrite EZWrite is a writing application for flat panels. ound Icon Function Menu Exit Description Click to pop up submenu (background change/save).
33 Menu operations Picture in picture Click to pop up picture in picture interface. Image import Click to import required images. Select Click to select writing symbols. Brush Cancel Click to write. Press 3 seconds or more to enter setting screen to set brush color and thickness. Click to erase writing symbols or drag a box selection to erase. Click to cancel the previous operation. Restore Click to restore the cancelled operation. Eraser Page Add page Reveal page number of the current picture.
