RP840G Interactive Flat Panel User Manual
Disclaimer BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents of this document. BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents thereof without obligation to notify any person of such revision or changes. Copyright Copyright 2014 BenQ Corporation. All rights reserved.
Table of Contents i Table of Contents Safety warnings and precautions ...................................... 1 Important safety instructions............................................ 2 Notes on this display ...................................................................... 2 Notes on the LCD panel of this display..................................... 2 Safety notice for remote control................................................. 3 Battery safety notice ...........................................
1 Safety warnings and precautions Safety warnings and precautions The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Important safety instructions 2 Important safety instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
3 Important safety instructions • Avoid placing the display in direct sun or where direct sun or spot lighting will shine onto the LCD panel, as the heat may damage the panel and the external casing of the display, and the bright light will make viewing the display more difficult than necessary. • The LCD panel consists of individual pixels to display images and is manufactured according to the design specifications. While 99.9% of these pixels work normally, 0.
Important safety instructions 4 BenQ ecoFACTS BenQ has been dedicated to the design and development of greener product as part of its aspiration to realize the ideal of the "Bringing Enjoyment 'N Quality to Life" corporate vision with the ultimate goal to achieve a low-carbon society.
5 Package contents Package contents Open the sales package and check the contents. If any item is missing or damaged, please contact your dealer immediately. LCD display Power cord x4 D-Sub (15-pin) cable x1 Audio interface cable Quick start guide USB cable x1 AAA battery x 2 Touch pen x 2 Remote control Wall mount • The type of power cord supplied may differ from that illustrated depending on your region of purchase.
Setting up the display Setting up the display Mounting the display You can install the display on a vertical surface with a suitable wall mounting bracket or on a horizontal surface with the optional desktop stands. Please pay attention to the following notes during installation: • This display should be installed by at least two adult persons. Attempting to install this display by only one person may result in danger and injuries. • Refer the installation to qualified technicians.
7 Setting up the display • To maintain proper ventilation, keep at least 10 mm of clear space from the back cover of the display to the wall. • Please consult a professional technician for wall mount installations. The manufacturer accepts no liability for installations not performed by a professional technician. 10mm (0.
Parts of the display and their functions 8 Parts of the display and their functions Front panel No. Name Description 1 Power Tap to enter energy saving mode. Press and hold for 2 seconds or more to power off. 2 Home Press to back to main screen. 3 Return Press to return to previous level of menu. 4 Menu Press to bring up function menu. 5 Volume Down Press to decrease volume. 6 Volume Up Press to increase volume. 7 Remote Control Signal Receiver Receives remote control signals.
9 Parts of the display and their functions Input/output terminals HDMI4(4K2K) HDMI4(4K2K) No. Name Description Connects USB devices such as USB keyboards, USB mice, and USB flash drives. High-definition multimedia interface signal input. Connect to PC with an HDMI output, a set-top-box, or other video devices capable of realizing touch function. • HDMI 3 realizes MHL function. • HDMI 4 realizes 4K2K resolution. 1 USB 2 HDMI IN 3 VGA OUT Connects to display devices with a VGA input.
Parts of the display and their functions Remote control 7 Numeric buttons Performs as numeric buttons. 8 Display Shows the current input source and information. 9 TV channel return key. 10 INPUT Selects the input source. 11 HOME Andriod system main screen button. 12 MENU Opens or closes the OSD menu. 13 Red button TV channel function button. 15 Green button TV channel function button. 15 Yellow button TV channel function button. 16 1 Turns the display on or off.
11 Parts of the display and their functions Direction key. Press for right selection. 21 Direction key. Press for downward selection. 22 23 ENTER Confirms your selection or save changes. 24 Quickly start writing application (EZWrite). Select writing pen quickly if the application is started. 25 Back Return key. 26 PgUp Built-in computer page (previous page). 27 PgDn Built-in computer page (next page). 28 CH+/CH- Channel switch key. 29 VOL+/VOL- Volume switch key.
Parts of the display and their functions Using the remote control Installing remote control batteries 1. Open the remote control battery compartment cover. 2. Insert the supplied batteries ensuring that the positive and negative marked battery terminals match the (+) and (-) marks in the battery compartment. The supplied batteries are provided for your convenience so that you can operate the display straight away. You should replace them as soon as possible. 3. Refit the battery compartment cover.
13 Parts of the display and their functions Remote control usage tips • Point and aim the top front of the remote control directly at the display’s remote control sensor window when you press the buttons. • Do not let the remote control become wet or place it in humid environments (like bathrooms). • If the display’s remote control sensor window is exposed to direct sunlight or strong light, the remote control may not operate properly.
Connection 14 Connection Connecting the VGA input 1. Connect the VGA IN jack on the display to the VGA output jack on a computer using a D-Sub (15-pin) cable. 2. Connect the computer’s audio output jack to the AUDIO IN jack on the display with a suitable audio cable. 3. To view images from this input, press the INPUT button on the remote control to switch to respective input source.
15 Connection Connecting the digital inputs 1. Connect the HDMI output jack of a computer or A/V device (such as a VCR or DVD player) to the HDMI input jack on the display using an HDMI cable. 2. To view images from this input, press the INPUT button on the remote control to switch to respective input source. HDMI4(4K2K) (MHL) HDMI cable DVD player The applicable cable is not supplied and should be purchased separately.
