Operation Manual

The OSD (On-Screen Display) menu 39
Setting menu
Language English
Schedule
Power Save High
Control Setting RS-232C
Network Settings
Set Monitor ID 1
HDMI Control Off
Advanced
Information
All Reset
Setting
:Move
:Enter
:Exit
ENTER
EXIT
Name Description
Language Sets your preferred language for the OSD menu.
Schedule
• Date and Time: Sets the current date and time.
• Clock Display: Sets whether to show the current time which was set.
• On/Off Timer: Sets when to turn on or off the display.
• Set the current time before you set the On/Off Timer.
• When schedule settings overlap, the Every Day setting takes priority over other weekly
settings.
Power
Save
Sets the display to enter the power saving mode when there is no signal
detected.
• Low: All source can enter the power saving mode and wake up the display.
• High: All source can enter the power saving mode, but only a VGA signal can
wake up the display or you have to press the power button to wake up the
display when other source is connected.
• Off: If no source is detected, the backlight will continue on.
• RS-232C can bring any mode out of the power saving status.
• On Power Save setting High, the LAN function is not available if the monitor enters
Power Save, or DC off mode.