Operation Manual

Connection20
Connecting the multimedia inputs
To connect to a network, do one of the following steps.
• Take a RJ-45 cable and connect one end to the RJ-45 jack on the display and the other
end to the RJ-45 port on your Ethernet or router.
• Plug a wireless dongle to the USB Type A jack.
To connect to a computer directly:
Take a USB cable, connect the mini B plug to the USB Mini-B jack on the display and
the type A plug to a computer.
To view video image from the input, press MULTI-MEDIA on the remote control or
select MULTI-MEDIA from the source selection bar to access the multimedia OSD
system. See the Multimedia OSD operation on page 42 for details.
The cables are not supplied and should be purchased separately.
R
L
AUDIO IN
AUDIO INVGA
AV
OUT
VIDEO IN
RS-232C
OUT
IN
Y
Pb
Pr
S-VIDEO
IN
OUT
IN
AUDIO 2AUDIO 1
AUDIO OUT
USB TYPE B FOR TOUCH
AC SWITCH
ON/OFF
100-240V~50-60Hz
3.4A
IN
1.7A
OUT
DP
HDMI
RJ-45
USB
Mini-B
USB Type A
MULTI-MEDIA
HDMI MIC IN
MULTI-MEDIA
USB Type A
RJ-45 cable
USB cable
USB flash drive
USB wireless dongle
1
2
3
4
1 2
3 4